Ricoh CL3500N Quick Installation Guide - Page 481
Setting Up as a Remote Printer (NetWare 4.x
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 481 highlights
Using a Printer Server O Press the {Esc} key to return to [Print Server Configuration Menu]. P Assign print queues to the created printer. Q From [Print Server Configuration Menu], select [Queues Serviced By Printer]. R Select the printer created. S Press the {Insert} key to select a queue serviced by the printer. You can select several queues. T Follow the instructions on the screen to make other necessary settings. Following these steps, check that the queues are assigned. U Press the {Esc} key until "Exit?" appears, and then select [Yes] to exit PCONSOLE. V Start the print server by entering the following from the console of the NetWare server. If the print server is in operation, quit and restart it. ❖ To quit CAREE: unload pserver ❖ To start CAREE: load pserver "print_server_name" ❒ If the printer works as configured, the message "Waiting for job" appears. Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5) Follow the procedure below to use the printer as a remote printer under NetWare 4.x, 5/5.1 and 6. ❒ To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS mode. ❒ Do not use the printer as a remote printer when Pure IP is used. Setting up using NIB Setup Tool A Log on to the file server as an administrator or administrator equivalent. B Start NIB Setup Tool from [Start] menu. C Click [Property Sheet], and then click [OK]. 241