Ricoh CL3500N Quick Installation Guide - Page 479
Setting Up as a Remote Printer (NetWare 3.x), Start NIB Setup Tool
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 479 highlights
Using a Printer Server S In the [Print Server Name] box, enter the print server name. Use the same print server name specified using NIB Setup Tool. T Select the [Define additional properties] check box, and then click [Create]. U Click [Assignments], and then click [Add] in the [Assignments] area. V In the [Available objects] box, click the queue you created, and then click [OK]. W Check the settings, and then click [OK]. X Start the print server by entering the following from the console of the NetWare server. If the print server is in operation, quit and restart it. ❖ To exit CAREE: unload pserver ❖ To start CAREE: load pserver "print_server_name" Setting Up as a Remote Printer (NetWare 3.x) Follow the procedure below to use the printer as a remote printer under NetWare 3.x. Setting up using NIB Setup Tool A Log on to the file server as a supervisor or supervisor equivalent. B Start NIB Setup Tool from [Start] menu. C Click [Property Sheet], and then click [OK]. D Select a printer you want to configure. E On the [NetWare] tab, enter the name of the print server in the [Print Server Name] box. F In the [File Server Name] box, enter the name of the file server in which a print server is created. You can also click [Browse] to browse through available file servers. G In the [Print Server Operation Mode] area, click [As Remote Printer]. H In the [Remote Printer No.] box, enter the printer number. 239