Ricoh CL3500N Quick Installation Guide - Page 434

Monitoring and Configuring the Printer ❖ Setting order of priority for each protocol • diprint msh> rendezvous diprint {0-99} • lpr msh> rendezvous lpr {0-99} • ipp msh> rendezvous ipp {0-99} You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority. ❖ IP TTL setting msh> rendezvous ipttl {1-255} You can specify the IP TTL (the number of routers a packet can pass through). ❒ The default is 255. ❖ Resetting the computer name and location information You can reset the computer name and location information. msh> rendezvous clear {cname | location} • cname Reset the computer name. The default computer name will be displayed when the computer is restarted. • location Reset the location information. The previous location information will be deleted. ❖ Interface configuration msh> rendezvous linklocal "interface_name" • If many types of interface are installed, configure the interface that communicates with linklocal address. • If you do not specify an interface, the Ethernet interface is automatically selected. • ip1394 can be specified only when the IEEE 1394 interface is installed. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface ether ip1394 wlan Interface configured Ethernet interface IEEE 1394 interface IEEE 802.11b interface 194