Ridgid 100-B Owners Manual - Page 6

Compact 100-B Pressing Tool ward and applying thousands of pounds of pressing force onto specially designed fittings. The entire cycle duration is approximately seven (7) seconds. Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released. LED displays on the top of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required. Jaw Sideplate ProPress® Jaw Arm LED Display Panel (Top) ProPress® Scissor Style Jaw Set Jaw Mounting Pin Switch Handle Tool Housing Battery Figure 1 - Compact 100-B Pressing Tool and ProPress® System Jaw Set Specifications Compact 100-B Pressing Tool: Motor Voltage 14.4 VDC Amperage 25.6Amp Power 325 Watts Weight 7.5 lbs. (3.4 Kg) with Battery 5.7 lbs. (2.6 Kg) without Battery Ram Force 5,400 Lbs. (24kN) Operating Temperature Range 32° F to 122° F (0° C to 50° C) NOTE! The Compact 100-B Pressing Tool and Compact Jaw Sets are protected under various U.S. and international patents and patent applications. ProPress® System For Copper Tubing Jaw Sets: RIDGID ProPress® Compact Jaw Sets are designed to mechanically press fittings onto 1/2″ 3/4″ and 1″ soft or hard copper tubing. An individual jaw set is required for each size tubing. Catalog No. 16958 16963 16978 Size 1/2″ 3/4″ 1″ Weight 2.15 lbs. (0,98kg) 2.22 lbs. (1,01 kg) 2.28 lbs. (1,03 kg) CAUTION Only use RIDGID pressing tools and ProPress® jaw sets that are specifically designed for use with ProPress® copper and bronze fittings. Use of unauthorized pressing tools and/or jaw sets to press ProPress® fittings voids the user's warranty. NOTE! Contact a RIDGID distributor or consult the ProPress® product catalog for a list of available fittings. When using ProPress® tools and fittings to join 1/2″ to 1″ soft copper tubing, users should ensure that tubing is sufficiently round to slide into the fitting without excessive effort or mechanical force. If a user finds that a section of 1/2″ to 1″ soft copper tubing requires more hand-force to slide into a ProPress® fitting than would a section of hard copper tubing of the same size, the user should re-round the soft tubing or find an acceptable section. PureFlow™ Systems for PEX Tubing Jaw Sets: RIDGID PureFlow™ Compact Jaw Sets are designed to mechanically press PureFlow™ fittings onto 3/8″, 1/2″, 3/4″ and 1″ Viega Pextron™, Fostapex™ or Pexcel™ PEX tubing. An individual jaw set is required for each size tubing. Catalog No. 17003 17008 17013 17018 Size 3/8″ 1/2″ 3/4″ 1″ Weight 2.39 lbs. (1,08kg) 2.38 lbs. (1,08 kg) 2.34 lbs. (1,06 kg) 2.60 lbs (1,18 kg) CAUTION Only use RIDGID pressing tools and RIDGID PureFlow™ jaw sets that are specifically designed for use with PureFlow™ fittings. Use of unauthorized pressing tools and/or jaw sets to press PureFlow™ fittings voids the user's warranty. NOTE! ProPress®, PureFlow™, Pexcel™, Pextron™ and FostaPex™ are registered trademarks of Viega GmbH & Co. KG. NOTE! RIDGID jaw sets are offered in two "series" • Standard Series • Compact Series These jaw sets are not interchangeable. That is, only compact series jaw sets will work with the Compact 100-B Pressing Tool. Similarly, only standard series jaw sets will work with standard series tools. Please refer to the standard series tools' (320-E, CT-400) operator's manuals for further information on these tools and jaws. 4 Ridge Tool Company