Samsung ML-1650 User Manual (user Manual) (ver.1.00) (English) - Page 168
Flash-rom, Module, Dram Module, Appendix C
View all Samsung ML-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Memory and PostScript DIMMs 4 Hold the PS DIMM so that the notch 1 and the connection point 2 are aligned with the slot as shown, and insert the DIMM all the way into the upper slot labeled DRAM MODULE at a 90 (Straight) degrees angle. 1 2 5 Hold the memory DIMM so that the notch 1 and the connection point 2 are aligned with the slot as shown, and insert the DIMM all the way into the lower slot labeled FLASH-ROM MODULE at a 90 (Straight) degrees angle. 1 2 6 Reconnect the power cord and printer cable, then turn the printer on. Note: For PostScript driver installation and usage information on a Macintosh system, refer to Appendix C, "Using Your Printer with Macintosh." For PS printing on a Windows system, refer to Appendix E, "Using Windows PostScript Driver." PRINTER OPTIONS H.3