Samsung ML-1650 User Manual (user Manual) (ver.1.00) (English) - Page 53
Printing on Labels
View all Samsung ML-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Printing on Labels Guidelines • Only use labels recommended for laser printers. • Do not load more than 25 labels into the Multi-Purpose Tray at a time. • Verify that the labels' adhesive material can tolerate fusing temperature of 200°C (392°F) for 0.1 second. • Make sure that there is no exposed adhesive material between the labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to printer components. • Do not feed a sheet of labels through the printer more than once. The adhesive backing is designed for one pass through the printer. • Do not use labels that are wrinkled, bubbled, separated from the backing sheet, or damaged in any way. 1 Open the Multi-Purpose Tray and the rear output tray. 2 Load labels with print side up, and against the left edge of the tray. Adjust the guide to fit the width of the labels. 3 When you print on labels, configure the paper source, type and size in the software application. For details, see page 5.3. Note: To prevent them from sticking together, remove label sheet from the output tray as they are printed out. 4.14 PRINT MEDIA