Samsung NP400B2BI User Manual Xp/windows7 Ver.1.8 (English) - Page 64
Connecting to the monitor port
View all Samsung NP400B2BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Connecting an External Display Device Chapter 2. Using the computer 63 Connecting to the monitor port You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. You can give better presentations by connecting the computer to a projector. 1 Connect the RGB port of the computer and the port of the monitor or TV with the monitor cable (15 pin). External Monitor TV Projector 3 Press the Fn + F4 key combination once. Then the Easy Display Manager screen appears where you can select a display device. Since pressing the F4 key while holding down the Fn key changes the selection, select a display device. • If the screen is not switched even if you press the Fn + F4 key combination, you have to install the Easy Display Manager program. • External Monitor / TV is not supported in the DOS Command Prompt window. 2 Connect the power cord of the connected monitor, TV or projector and turn the power on.