Samsung NX10 User Manual (user Manual) (ver.1.3) (English) - Page 36
MENU], Shooting3
UPC - 044701013655
View all Samsung NX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 Using the OIS in the menu option After setting the OIS switch, select the OIS function in the menu option 1 In Shooting mode, press [MENU]. 2 Select Shooting3 ( 3/ 3) ª OIS ª an option. OIS Mode 1 The OIS function is applied only when pressing the shutter in full or half. OIS Mode 2 The OIS function is always applied. • The OIS function may not work well in the following situations: - When you take a picture while tracing a moving object - When a big vibration occurs beyond the range of stabilization - When the shutter speed is too slow due to a circumstance like night shooting - When the battery capacity is not sufficient - When you are shooting a close-up shot • When you use a tripod, please disable the OIS function since the image can be shaken due to the vibration of OIS function. • If the camera is struck or dropped while you are taking a picture, the display can be impaired. If this occurs, turn the camera off and then on, and the camera should operate normally again. • Since the battery consumption can increase along with the use of OIS function, it is recommended to use the function only if needed. • To set the OIS function by using the menu, set [OIS] of lens to ON. This function may not operate depending on the lens model. • The function can be set directly by pressing [Fn] in the shooting mode.