Samsung SCX 5530FN User Manual (ENGLISH) - Page 81
LSU Hsync Error, LSU Motor Error - low heat error cycle power
UPC - 635753618044
View all Samsung SCX 5530FN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Message Global Server Auth Failed Global Server Comm. Error Global Server Not Configured Global Server Not Found Group Not Available [Incompatible] Invalid Server Address Line Busy [Line Error] Meaning Suggested solutions When there is a authentication fail while connecting to the global server this message displays. Check the authentication account and password. This error message displays when there is a communication error between the global server and the device. • Try again. • Contact a LDAP Server administrator. When no global server is configured, this message displays. Check the LDAP server configuration settings. When the device is unable to find the Global server. Check the LDAP server address, The LDAP server address is incorrect, or the server has failed. You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation. Use a speed dial number or dial a number manually using the number keypad. The machine has received a fax from which is registered as a junk fax.. The received fax data will be deleted. Reconfirm junk fax setup, see page 10.2. The server address you have entered is invalid. Enter the correct server address. The receiving fax machine did not answer or the line is already engaged. Try again after a few minutes. Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line. Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on. See page 10.1. Message Low Heat Error Cycle Power LSU Motor Error Cycle Power LSU Hsync Error Cycle Power Main Motor Locked Mail Exceeds Server Support Memory Full MP Tray Paper Empty Network Error [No Answer] Not Assigned [No Paper] Add Paper One Page is Too Large Meaning Suggested solutions There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back inches. If the problem persists, please call for service. A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back inches. If the problem persists, please call for service. There is a problem in the main motor. Open and then close the front cover. The mail size is larger than the supported size by SMTP server. Divide your mail or reduce the resolution. The memory is full. Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation. There is no paper in the multi-purpose tray. Load paper in the multipurpose tray. See page 5.7. There is a problem with the network. Contact your network administrator. The receiving fax machine has not answered after several redial attempts. Try again. Make sure that the receiving machine is operational. The speed button or speed dial number you tried to use has no number or email address assigned to it. Enter the number or email address manually using the number keypad or store the number or address. The paper in the tray Load paper in the tray. has run out. See page 5.5. Single page data exceeds the configured mail size. Reduce the resolution and try again. 14.8