Sanyo PLC-WL2503 RS232C Expand - Page 23

CF_H - POS Command, CF_V - POS Command, CF_DDOTS Command

Get Sanyo PLC-WL2503 - 2500 Lumens PDF manuals and user guides
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000~nnnn" --- Directly select Horizontal Position setting value %1 "nnnn" shows maximum value, it is current Total Dots value - Display Dots value "UP Current Horizontal Position setting value + 1 "DN Current Horizontal Position setting value - 1 Details Set Horizontal Position value of PC signal. The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.5.5 CF_V - POS Command Command "CF_V-POS_%1"[CR] "0000~nnnn" --- Directly select Vertical Position setting value %1 "nnnn" shows maximum value, it is current Total Line value - Display Line value "UP Current Vertical Position setting value + 1 "DN Current Vertical Position setting value - 1 Details Set Vertical Position value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input source is Video system 8.5.6 CF_DDOTS Command Command "CF_DDOTS_%1"[CR] "0256"~"nnnn" --- Directly select Display Dots setting value "nnnn" shows maximum value, it is current Total Dots value - Horizontal %1 Position value Even number is available and when odd number is set, it is rounded out. "UP Current Display Dots setting value + 2 "DN Current Display Dots setting value - 2 Details Set Display Dots value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 22/72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
PLC-WL2500 / WL2501/ WL2503
Expand Serial Command Functional Specifications
22/72
8.5.4
CF_H – POS Command
Command
“CF_H-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Horizontal Position setting value
“nnnn” shows maximum value, it is current Total Dots value - Display Dots value
“UP” -------------- Current Horizontal Position setting value + 1
“DN” -------------- Current Horizontal Position setting value - 1
Details
Set Horizontal Position value of PC signal.
The value set by this command will not be saved to projector. Therefore, when
turning into Standby status or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]
8.5.5
CF_V – POS Command
Command
“CF_V-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Vertical Position setting value
“nnnn” shows maximum value, it is current Total Line value - Display Line value
“UP” -------------- Current Vertical Position setting value + 1
“DN” -------------- Current Vertical Position setting value – 1
Details
Set Vertical Position value of PC signal
The value set by this command will not be saved to projector. Therefore, when
turning into Standby status or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Acceptable
“000”[CR]
Response
Unacceptable
“101”[CR] ---- When Input source is Video system
8.5.6
CF_DDOTS Command
Command
“CF_DDOTS_%1”[CR]
%1
“0256”~”nnnn” --- Directly select Display Dots setting value
“nnnn” shows maximum value, it is current Total Dots value -
Horizontal
Position value
Even number is available and when odd number is set, it is rounded out.
“UP” -------------- Current Display Dots setting value + 2
“DN” -------------- Current Display Dots setting value – 2
Details
Set Display Dots value of PC signal
The value set by this command will not be saved to projector. Therefore, when
turning into Standby status or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]