Sanyo PLC-WL2503 RS232C Expand - Page 70
Other Status Read Command, 12.1 CR_STATUS Command, 12.2 CR_SIGNAL Command, 12.3 CR_VMUTE Command
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector behavior. This command affects the same as "CR0" of Basic Serial command, but this has an error code. Acceptable "000_%1"[CR] "00"= Power ON "80"= Stand by "40"= Count down "20"= Cooling down "10"= Power failure Response %1 "28"= Cooling down due to abnormal temperature "88"= Stand by after Cooling down "24"= Power saving cooling down "04"= Power saving "21"= Cooling down due to Lamp failure "81"= Stand by after Cooling down due to Lamp failure Unacceptable "Error Code"[CR] 9.12.2 CR_SIGNAL Command Command "CR_SIGNAL"(CR) Details Get Signal status if there is signal or not Acceptable "000_%a"[CR] Response %a "ON Signal is found "OFF There is no signal Unacceptable "Error code"[CR] 9.12.3 CR_VMUTE Command Command "CR_VMUTE"[CR] Details Get setting status of No Show Acceptable "000_%a"[CR] Response %a "ON" -------- No Show is ON "OFF" ------- No Show is OFF Unacceptable "Error code"[CR] 9.12.4 CR_FREEZE Command Command "CR_FREEZE"[CR] Details Get setting status of Freeze Acceptable "000_%a"[CR] Response %a "ON Freeze is ON "OFF Freeze is OFF Unacceptable "Error code"[CR] 69/72