Sanyo PLC-WL2503 RS232C Expand - Page 44
CF_FILH Command, 10.32 CF_FDEFAULT Command
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.31 CF_FILH Command Command "CF_FILH_%1"[CR] %1 "RST Reset Filter used time Details Reset filter used time Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.32 CF_FDEFAULT Command Command "CF_FDEFAULT_%1"[CR] %1 "RST" Details Set the value to Factory Default This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 43/72
PLC-WL2500 / WL2501/ WL2503
Expand Serial Command Functional Specifications
43/72
8.10.31 CF_FILH Command
Command
“CF_FILH_%1”[CR]
%1
“RST” ---------------Reset Filter used time
Details
Reset filter used time
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]
8.10.32 CF_FDEFAULT Command
Command
“CF_FDEFAULT_%1”[CR]
%1
“RST”
Details
Set the value to Factory Default
This command is available in normal Power ON status.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]