Sanyo PLC-WL2503 RS232C Expand - Page 29

PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1"[CR] "NORMAL Select Normal size "TRUE Select True size "FULL Select Full screen size "CUSTOM Select Custom size Input is "DZOOM_UP Expand image size with Digital Zoom Computer "DZOOM_DN Reduce image size with Digital Zoom "UP Switch selectable screen size forward (Normal → True →Full → Custom → Normal) "DN Switch selectable screen size backward (Normal →Custom → Full→ True → Normal) %1 "NORMAL Select Normal mode "ZOOM Select Zoom mode "NATURAL Select Natural wide mode "FULL Select Full mode Input is Video "CUSTOM Select Custom size "UP Switch selectable screen size forward (Normal → Full → Zoom → Wide → Natural → Custom → Normal...) "DN Switch selectable screen size backward (Custom → Natural → Wide → Zoom → Full → Normal → Custom...) Details Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN" start effecting from the first command. This command is available in normal Power ON status. Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered, the signal recognized as Video Input. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.2 CF_DZCENT Command Command "CF_DZCENT_%1"[CR] %1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER") Details Cancel Digital Zoom When image is expanded or shrunk, reset its value. This command is available in normal Power ON status and when Input is Computer. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 28/72