Sanyo PLC-WL2503 RS232C Expand - Page 43

PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.27 CF_FANMODE Command Command "CF_FANMODE_%1"[CR] %1 "L1 Set Fan Mode to L1 "L2 Set Fan Mode to L2 Details Switch Fan Mode When L1 is selected, fan noise after POWER OFF is louder. When L2 is selected, fan noise after POWER OFF becomes quiet. However fan rotates longer than L1. The status set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.28 CF_FANCONTROL Command Command "CF_FANCONTROL_%1"[CR] "OFF Set Fan control to Off %1 "ON1 Set Fan control to On1 "ON2 Set Fan control to On2 Details Set Fan control setting. The status set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.29 CF_DELAYCTRL Command Command "CF_DELAYCTRL_%1"[CR] %1 "ON Set Video delay control On "OFF Set Video delay control Off Details Set Video delay control. The status set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.30 CF_FILTIMER Command Command "CF_FILTIMER_%1"[CR] "2000 Set 2000 hours "3000 Set 3000 hours "4000 Set 4000 hours %1 "OFF No warning display "UP Switch Filter timer forward (Off →2000 → 3000 → 4000 → Off) "DN Switch Filter timer backward (Off → 4000 → 3000 → 2000→ Off) Details Set timer of Filter warning display. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 42/72