Sanyo PLC-WL2503 RS232C Expand - Page 38
CF_CEIL Command, 10.10 CF_REAR Command, 10.11 CF_SCREENASPECT Command, 10.12 CF, Command
![]() |
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.9 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling setting. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.10 CF_REAR Command Command "CF_REAR_%1"[CR] %1 "ON Set Rear to ON "OFF Set Rear to OFF Details Set/Cancel Rear setting. When Rear is ON, image is left/right reversed. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.11 CF_SCREENASPECT Command Command "CF_SCREENASPECT_%1"[CR] "43MODE" %1 "169MODE" "1610MODE" Select 4 3 mode Select 16 9 mode Select 16 10 mode Details Set Screen aspect mode. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.12 CF_ HDMI SETUP Command Command "CF_ HDMI SETUP _%1"[CR] %1 "NORMAL Select Normal mode "ENHANCED Select Enhanced mode Details Select image mode of HDMI setup. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 37/72
![](/manual_guide/products/sanyo-plcwl2503-rs232c-expand-d2dcdde/38.png)