Sanyo PLC-WL2503 RS232C Expand - Page 32
CF_HPOS Command
![]() |
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 "002 2 "001 1 "000 0 %1 "-01 1 "-02 2 Details Response "-14 14 "-15 15 "UP Horizontal Position setting value + 1 "DN Horizontal Position setting value - 1 Set Horizontal Position This command is available in normal Power ON status. Note1) Screen mode is changed into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 31/72
![](/manual_guide/products/sanyo-plcwl2503-rs232c-expand-d2dcdde/32.png)
PLC-WL2500 / WL2501/ WL2503
Expand Serial Command Functional Specifications
31/72
8.7.8
CF_HPOS Command
Command
“CF_HPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
�
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
�
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Horizontal Position setting value + 1
“DN” ---------- Horizontal Position setting value - 1
Details
Set Horizontal Position
This command is available in normal Power ON status.
Note1) Screen mode is changed into Custom by receiving this command.
Note2) When there is no Input, projector returns 101 and the command does not
execute.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]