Sharp IT23M1U Operation Manual - Page 13
Remote control - 23
View all Sharp IT23M1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Français Deutsch Italiano Remote control Using the remote control Use the remote control by pointing it towards the remote sensor window on the monitor. Objects between the remote control and sensor window may prevent proper operation. Remote sensor window 2. Insert two ("AAA" size, UM/SUM-4) batteries. Position the positive and negative ends of the batteries as indicated in the compartment. + - + 5 m (16.4 ft.) 30° 30° (up/down/left/right) 3. Close the battery cover. Engage the claw on the cover into the battery housing and slide shut. Cautions regarding use of remote control - Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and do not place in an area with high humidity. - Do not install or place the remote control under direct sunlight. The heat may deform the unit. - The remote control may not work properly if the remote sensor window of the monitor is under direct sunlight or strong lighting, or a fluorescent light is near the monitor. In such case, change the angle or place of the lighting or monitor, or operate the remote control closer to the remote sensor window. - Do not use the remote control simultaneously with remote controls of other equipments. Batteries for the remote control Before using the monitor for the first time, install two ("AAA" size, UM/SUM-4) batteries (supplied). When the operable distance becomes shorter, replace the batteries immediately with new ("AAA" size, UM/SUM-4) batteries. 1. Open the battery cover. Slide the cover while pressing the ( ) part. CAUTION! Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instructions below. - Place batteries with their terminals corresponding to the (+) and (-) indications. - Different types of batteries have different characteristics. Do not mix batteries of different types. - Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new battery and/or cause the old battery to leak chemicals. - Remove batteries when they become weak. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. - The batteries supplied with the monitor may have a shorter life expectancy due to storage conditions. - If the remote control will not be used for an extended period of time, remove the batteries from the remote control. Español English IT-23M1U_gb_01.P65 11 E11 2004/08/23, 15:28