Sharp IT23M1U Operation Manual - Page 56

Muting the sound MUTE, Changing BRIGHT MODE, Preventing changes to adjusted, values ADJUSTMENT LOCK

Page 56 highlights

Other features Muting the sound (MUTE) This feature is handy when you want to mute the sound such as when the phone rings or someone comes to the door. 1. Press the MUTE button. The sound will be muted and "MUTE" will be displayed. "MUTE" will disappear after several seconds. Canceling muting 1. Press the MUTE button again, or press the VOL buttons. Changing BRIGHT MODE You can lower energy consumption by decreasing screen brightness. If "OFF" is selected, images will disappear and only sound will be output. 1. Press the BRIGHT MODE button. The mode switches in the following order each time you press the button: BRIGHT DARK1 DARK2 OFF BRIGHT... Notes: - You can set screen brightness individually for PC mode and TV/AV mode. - You can set screen brightness using the ENTER/BRIGHT MODE button on the monitor. - While "BRIGHT MODE" is set to "OFF", you can operate MTS mode, MUTE, Dolby Virtual, and VOL buttons on the remote control. However, an adjustment screen will not be displayed. And when you operate the other buttons, the display will be turned on with the mode "BRIGHT". Preventing changes to adjusted values (ADJUSTMENT LOCK) [Remote control] - POWER button - VOL buttons - MUTE button - Input buttons (PC, TV, AV1, and AV2) - CH buttons - Channel buttons (0-9 and 100) - FLASHBACK button Perform this procedure on the monitor. 1. Turn off the monitor power. 2. While pressing the MENU button, press the MAIN POWER button (i.e. turn the power on). Continue to press the buttons until "LOCK ADJUSTMENT?" appears on the screen. 3. Press the VOL/BRIGHT > button. Releasing the adjustment lock Perform this procedure on the monitor. 1. Turn off the monitor power. 2. While pressing the MENU button, press the MAIN POWER button (i.e. turn the power on). Continue to press the buttons until "UNLOCK ADJUSTMENT?" appears on the screen. 3. Press the VOL/BRIGHT > button. CAUTION! - When the adjustment lock is set, all buttons on the monitor and remote control other than the above buttons are disabled. To use buttons other than the above buttons, release the adjustment lock. Resetting all adjustment values (ALL RESET) All adjustment values will be reset for both PC mode and TV/AV mode (including channel settings and the secret number for V-chip Block). Concerning the ALL RESET procedure, refer to the end of this manual. Disabling the control buttons other than the following buttons (monitor and remote control) prevents adjusted values from being changed. The changing of adjusted values for both PC mode and TV/AV mode will be prevented. [Monitor] - MAIN POWER button - VOL/BRIGHT buttons - INPUT button - CH buttons E54 IT-23M1U_gb_02.P65 54 2004/08/20, 10:44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

E54
Other features
Muting the sound (MUTE)
This feature is handy when you want to mute the
sound such as when the phone rings or someone
comes to the door.
1. Press the MUTE button.
The sound will be muted and "MUTE" will be
displayed.
"MUTE" will disappear after several seconds.
Canceling muting
1.Press the MUTE button again, or press the VOL
buttons.
Changing BRIGHT MODE
You can lower energy consumption by decreasing
screen brightness. If "OFF" is selected, images will
disappear and only sound will be output.
1. Press the BRIGHT MODE button.
The mode switches in the following order each
time you press the button:
BRIGHT
±
DARK1
±
DARK2
±
OFF
±
BRIGHT...
Notes:
-
You can set screen brightness individually for
PC mode and TV/AV mode.
-
You can set screen brightness using the
ENTER/BRIGHT MODE button on the monitor.
-
While "BRIGHT MODE" is set to "OFF", you can
operate MTS mode, MUTE, Dolby Virtual, and
VOL buttons on the remote control. However, an
adjustment screen will not be displayed. And
when you operate the other buttons, the display
will be turned on with the mode "BRIGHT".
Preventing changes to adjusted
values (ADJUSTMENT LOCK)
Disabling the control buttons other than the
following buttons (monitor and remote control)
prevents adjusted values from being changed.
The changing of adjusted values for both PC
mode and TV/AV mode will be prevented.
[Monitor]
-
MAIN POWER button
-
VOL/BRIGHT buttons
-
INPUT button
-
CH buttons
[Remote control]
-
POWER button
-
VOL buttons
-
MUTE button
-
Input buttons (PC, TV, AV1, and AV2)
-
CH buttons
-
Channel buttons (0-9 and 100)
-
FLASHBACK button
Perform this procedure on the monitor.
1.Turn off the monitor power.
2.While pressing the MENU button, press the
MAIN POWER button (i.e. turn the power on).
Continue to press the buttons until "LOCK
ADJUSTMENT?" appears on the screen.
3. Press the VOL/BRIGHT > button.
Releasing the adjustment lock
Perform this procedure on the monitor.
1.Turn off the monitor power.
2.While pressing the MENU button, press the
MAIN POWER button (i.e. turn the power on).
Continue to press the buttons until "UNLOCK
ADJUSTMENT?" appears on the screen.
3. Press the VOL/BRIGHT > button.
CAUTION!
-
When the adjustment lock is set, all buttons on
the monitor and remote control other than the
above buttons are disabled. To use buttons
other than the above buttons, release the
adjustment lock.
Resetting all adjustment values
(ALL RESET)
All adjustment values will be reset for both PC
mode and TV/AV mode (including channel settings
and the secret number for V-chip Block).
Concerning the ALL RESET procedure, refer to
the end of this manual.
IT-23M1U_gb_02.P65
2004/08/20, 10:44
54