Sharp IT23M1U Operation Manual - Page 23
Adjusting the computer display automatically, for analog signals - resolution
![]() |
View all Sharp IT23M1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Français Deutsch Italiano Adjusting the computer display automatically (for analog signals) When using the monitor as a computer display for the first time or after having changed the system settings during use, perform an automatic screen adjustment. "CLOCK", "PHASE", "H-POS", and "V-POS" will be set to their optimum states. Note: - When using the monitor with a digital connection, automatic screen adjustment is unnecessary. POWER Virtual PC TV AV1 AV2 FREEZE MULTI VIEW MODE SLEEP MENU BRIGHT MODE ENTER BRIGHT 1. Press the MAIN POWER button to turn on the monitor. When the power LED lights red, press the POWER button on the remote control. 2. Press the PC button to select the PC (analog) mode. "PC" and "ANALOG" will appear in the upperright corner of the screen. If "PC" and "DIGITAL" appear, press the PC button again. 3. Turn on the computer, and then display an image that makes the entire screen display light colors (such as a light desktop background). If you are running Windows, you can use the adjustment pattern on the supplied Utility Disk (see page E31). 4. Press the MENU button to display the MENU screen. The cursor is positioned at "ADJUSTMENT". MENU ADJUSTMENT GAIN CONTROL AUDIO ADJUST COLOR CONTROL MODE SELECT MULTI SCREEN < PC 5. Press the ENTER button. The ADJUSTMENT menu will be displayed. ADJUSTMENT < PC > RETURN AUTO CLOCK PHASE H-POS V-POS [ 127 ] >> [ 0 ] >> [ 200 ] >> [ 50 ] >> RESET 6. Press the ENTER button to auto-adjust the settings. The screen will go dark and "ADJUSTING" will be displayed. After a few seconds, the ADJUSTMENT menu will return. 7. Press the MENU button to exit the screen. Notes: - If you want to select a monitor resolution of 1360 x 768, 1280 x 768 or 1024 x 768 when using the monitor with an analog connection, specify the horizontal resolution for a 768-line screen in the MODE SELECT menu (PC mode). (See page E35.) - If you want to select a monitor resolution of 640 x 480 or 848 x 480 when using the monitor with an analog connection, specify the horizontal resolution for a 480-line screen in the MODE SELECT menu (PC mode). (See page E35.) - It may not be possible to achieve correct adjustment with the first automatic adjustment. In such a case, try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments (page E31) can be performed after the automatic adjustment. - When further fine adjustment is needed. - When the computer's video input signals are Composite Sync or Sync on Green. (Automatic adjustments may not be possible.) - When "OUT OF ADJUST" is displayed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the adjustment pattern or try displaying an image that makes the entire screen very bright.) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. Español English IT-23M1U_gb_01.P65 21 E21 2004/08/20, 10:41
![](/manual_guide/products/sharp-it23m1u-operation-manual-c0e3492/23.png)