Sharp IT23M1U Operation Manual - Page 19
Cable TV CATV connection
View all Sharp IT23M1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Français Deutsch Connecting the monitor to a home antenna terminal Cable TV (CATV) connection - A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, screw the 75-ohm cable to the ANT (antenna input) terminal. - Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your monitor to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: An RF switch provided with two inputs (A and B) is required (not supplied). "A" position on the RF switch (not supplied): You can view all unscrambled channels by using the monitor's channel buttons. "B" position on the RF switch (not supplied): You can view the scrambled channels via the converter/ descrambler by using the converter's channel keys. RF switch (not supplied) OUT IN Cable TV converter/ descrambler (not supplied) Two-set signal splitter (not supplied) Cable TV Line Note: - Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required. Italiano Español English IT-23M1U_gb_01.P65 17 E17 2004/08/20, 10:41