Sharp IT23M1U Operation Manual - Page 24

Setting TV channels The following table shows the channels this monitor can receive. VHF Channels 2 through 13 UHF Channels 14 through 69 Cable Channel 1 (HRC and IRC mode only) Channels 2 through 125 (STD, HRC and IRC) (You must subscribe to a cable TV service to receive cable channels.) Displaying the CHANNEL SETTING menu POWER Virtual PC TV AV1 AV2 FREEZE MULTI VIEW MODE SLEEP MENU TV memory for channels is empty at shipment. To receive channels, use the CHANNEL SETTING menu. BRIGHT MODE ENTER BRIGHT Note: - Release the adjustment lock (see page E54) if it has been set. You cannot use the CHANNEL SETTING menu while the adjustment lock is set. Channel setting methods There are two ways to set channels. Automatically setting channels you can receive (CHANNEL SEARCH) The monitor will automatically set the channels it can receive in your area. Setting channels one at a time (CHANNEL MEMORY) This method is for manually setting the channels you want one by one. Use this method if you want to add other channels after using "CHANNEL SEARCH". 1. Press the MAIN POWER button to turn on the monitor. When the power LED lights red, press the POWER button on the remote control. 2. Press the TV button to select TV mode. A channel number will appear in the upper-right corner of the screen. 3. Press the MENU button to display the MENU screen. MENU VIDEO ADJUST AUDIO ADJUST CHANNEL SETTING SCREEN ADJUST MODE SELECT CLOSED CAPTION V-CHIP BLOCK < TV/AV 4. Press the buttons to select "CHANNEL SETTING", and press the ENTER button. The CHANNEL SETTING menu will be displayed. CHANNEL SETTING RETURN AIR/CABLE [ AIR ] CABLE MODE [ STD ] CHANNEL SEARCH >> CHANNEL MEMORY >> < TV/AV > IT-23M1U_gb_01.P65 22 E22 2004/08/20, 10:42