Sharp LC-M3700 LC-M3700 Operation Manual - Page 27
Mounting the Wide LCD Monitor
View all Sharp LC-M3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Mounting Options (Continued) Marking A Upper side Marking A Wall-mount bracket Attaching wall-mount bracket to LC-M3700 (horizontal mount) M6 30mm length 2. Attach the wall-mount bracket (with the angle set) to the back of the Wide LCD Monitor. GMake sure all cables and cords are connected and bundled (see page 29). GAttach the terminal cover to the back of the monitor and align the wall-mount screw holes (Marking A: 4 locations) with the holes (4 locations) on the back of the Wide LCD Monitor. GUse the supplied M6 30 mm length screws (4 screws) to securely fasten the wall-mount bracket in place. Attaching wall-mount bracket to LC-M3710 (vertical mount) M6 30mm length Upper side Mounting the Wide LCD Monitor • Be sure to use 2 people when installing the Wide LCD Monitor to the base bracket. Caution • Be sure to perform Steps Å and ı below. Just performing Step Å could result in the display falling off, which is very dangerous. Install the wall-mount bracket attached to the Wide LCD Monitor to the base bracket. Å Hang the square holes ( ) of the wall-mount bracket on the hooks (page 24) of the base bracket. ı Tighten the wall-mount bracket and base bracket screws. (Be sure to do this.) Å ı Wide LCD Monitor Base bracket Make sure the hooks are engaged. Wall Tighten from the bottom. M5 screws 8mm length (2 screws) US 26