Sharp LC-M3700 LC-M3700 Operation Manual - Page 57
ID No. Setting
View all Sharp LC-M3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Settings and Adjustments (Continued) Picture Flip Adjustable range Default Normal Mirror Upside Down Rotate Normal/Mirror/Upside Down/Rotate Normal Normal image Mirror image Upside down image Rotated image Language Function Adjustable range Default Selects display language setting. Japanese, English, German, French, Spanish English INPUT2 Select Function Adjustable range Default Input Output Note: Selects INPUT2 terminal use. Input/Output Input Using as Input Using as Output (This setting cannot be switched when INPUT2 is currently being displayed.) ID No. Setting Function Adjustable range Default Note: Assigns ID numbers to monitors connected in a daisy chain (see page 37), using RS-232C cables. 0 - 255 0 The numbers 1 to 255 are available for ID numbers. (If "0" is set, the system regards this as the state where no ID number is set.) Although numbers up to 255 can be used for monitor IDs, the number of connectable monitors varies depending on the length of RS-232C cables and the installation environment. Use \/| to move between digits, and '/" to raise or lower digit values. Enlarge: (see page 61 for details.) Function Sets the image enlargement ratio, and the part of the original image to be enlarged. Adjustable range Off/2 × 2/3 × 3 Default Off ↓(After adjustment) Adjustable range (When set to "2 × 2") 1 - 4 Default (When set to "2 × 2") 1 Adjustable range (When set to "3 × 3") 1 - 9 Default (When set to "3 × 3") 1 Panel Protection Cover Function Adjustable range Default Note: Setting for panel protection cover. Be sure to set this item when using the cover. Attached/Detached Detached Set to "Attached" when using the optional panel protection cover (commercially available in the future). US 56