Sharp LC-M3700 LC-M3700 Operation Manual - Page 39
Communication procedure - code
View all Sharp LC-M3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PC Operation (Continued) Communication procedure Basic operation When a command is sent from the PC to the monitor, the monitor operates according to the received command, and sends a response message to the PC. Carriage return code C1 C2 C3 C4 P1 P2 P3 P4 ↵ Command field (4 prescribed alphanumerical characters) Parameter field (4 character string comprised of: 0-9, +, -, space, ?) Example: VOLM0030 POWR 1 (" " indicates a space.) * Be sure to input 4 characters for the parameter. Pad with spaces if necessary. × VOLM30 ⅙ VOLM 30( ) (" " indicates a space, " " is the carriage return code (0DH, 0AH or 0DH).) If a command has "R" listed for "Direction" in the "RS-232C Command table" on page 46, the current value can be returned by using "?" as the parameter. Example: 1If an ID number has not been set: VOLM???? ←From PC to monitor (current volume setting: ?) 30 ←From monitor to PC (current volume setting: 30) 2If an ID number has been assigned (For example, ID number = 001) VOLM ? ←PC to monitor (" " indicates a space) 30 001 ←Monitor to PC (" " indicates a space) I When a command has been executed correctly Carriage return code (0DH, 0AH) OK↵ This is returned when execution of the command is finished. I When a command has not been executed correctly* Carriage return code (0DH, 0AH) ERR↵ * This is returned when there is no such command, or when the command cannot be used in the current state of the monitor (i.e. video auto-adjustment with video display). * If there is a bad connection between the PC and monitor, or if communication has not been established, nothing is returned (not even ERR). I If execution of the command is taking some time Carriage return code (0DH, 0AH) WA I T ↵ If a command takes some time to execute, WAIT may be returned as the return value. Wait for a moment, and OK or ERR will be returned. New commands cannot be received during this time, even if they are sent. I If RS-232C is locked Carriage return code (0DH, 0AH) L OC K E D ↵ If RS-232C control has been locked with Control lock (see page 54), LOCKED is returned as the returned value. US 38