Sony D-VM1 Operating Instructions (primary manual) - Page 56
Connecting to a Dolby Surround Pro Logic decoder amplifier receiver and 3, to 6 speakers
View all Sony D-VM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
C Connecting to a Dolby Surround Pro Logic decoder amplifier (receiver) and 3 to 6 speakers This connection will allow you to enjoy the surround effects of the Dolby Surround Pro Logic decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, MPEG audio, or DTS decoder, refer to page 58. You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multichannel audio (Dolby Digital) discs. Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used. If your amplifier (receiver) has R and L audio input jacks only, use C-1 . If your amplifier (receiver) has a digital input jack, use C-2 . xRecommended surround sound effects using this connection with your amplifier (receiver) • Dolby Surround Pro Logic (Set "SOUND MODE" to "NORMAL" in this case.) z For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver). 56