Sony D-VM1 Operating Instructions (primary manual) - Page 58
Connecting to an AV amplifier receiver with a digital input jack having a, Dolby Digital, MPEG* audio
View all Sony D-VM1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG* audio, or DTS decoder, and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function of your AV amplifier (receiver). xRecommended surround sound effects using this connection with your amplifier (receiver) • Dolby Digital (5.1ch) • DTS (5.1ch) • MPEG audio (5.1ch) (Set "SOUND MODE" to "NORMAL" in either cases.) z To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct speaker setting location. Note After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 61). If your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 61). If your AV amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG" (page 67). Otherwise, no sound or a loud noise will come from the speakers. * Except for the USA and Canadian models 58