Sony DSC-U30 Operating Instructions - Page 59

Troubleshooting Troubleshooting If you experience trouble with your camera, try the following solutions. 1 First check the items on the tables below. If code "C:ss:ss" is displayed on the LCD screen, the selfdiagnosis display function is working (page 68). 2 Should your camera still not work properly, press the RESET button on the bottom of the camera using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) RESET button 3 Should your camera still not work properly, consult your Sony dealer or local authorized Sony service facility. Troubleshooting Batteries and power Symptom Cause Solution The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out soon. • You have used the camera in an extremely cold location. • The batteries are discharged. • The battery contacts or the terminals on the battery/"Memory Stick" cover are dirty. • The batteries are exhibiting the "memory effect" (page 11). • The batteries are dead (page 75). - p Install charged batteries (page 10). p Wipe any dirt off from them with a dry cloth (page 11). p To restore the batteries to their original condition, use them until they are fully drained before recharging them. p Replace the batteries with new ones. The battery life is short. • You are shooting/viewing images in an extremely cold location. • The batteries are not charged enough. • The batteries are dead (page 75). - p Charge the batteries (page 10). p Replace the batteries with new ones. You cannot turn on the • The batteries are not installed correctly. p Install the batteries correctly (page 12). camera. • The batteries are discharged. p Replace them with charged batteries (page 10). • The batteries are dead (page 75). p Replace the batteries with new ones. 59