Sony DSC-U30 Operating Instructions - Page 72

Precautions Do not leave the camera in the following places • In extremely hot place, such as in a car parked in the sun. The camera body may become deformed or this may cause a malfunction. • Under direct sunlight or near a heater. The camera body may become deformed or this may cause a malfunction. • On rocking vibration. • Near strong magnetic place. • In sandy or dusty places, be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. On cleaning Cleaning the LCD screen Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use the following as this may damage the finish or the casing. • Thinner • Benzine • Alcohol • Diposable cloth • Volatile insecticide • Contact with rubber or vinyl for a long time Note on operating temperature Your camera is designed for use between the temperatures of 0°C and 40°C (32°F and 104°F). Shooting in extremely cold or hot places that exceed this range is not recommended. On moisture condensation If the camera is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside or outside the camera. This moisture condensation may cause a malfunction of the camera. Moisture condensation occurs easily when: • The camera is brought from a cold location such as a ski slope into a warmly heated room. • The camera is taken from an airconditioned room or car interior to the hot outdoors, etc. 72