Sony HDW F900R Operation Manual - Page 54
Recording Tele-File marks, Setting the Tele-File mark to be recorded
View all Sony HDW F900R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 3 Recording and Playback The following three Tele-File marks are available: • OK: Place this mark when you decide the recorded images are good. • NG: Place this mark when you decide the recorded images are not good. • KP: Place this mark when it is hard to decide whether or not the recorded images are good just after recording, or when you want to insert a mark between multiple shots. Recorded Tele-File marks are read by studio-use devices, logging software, and so on, which support the Tele-File function. These marks are very helpful for improving the efficiency of tape editing. Before recording a Tele-File mark To use this function, the TELE-FILE MARK function should be assigned to the ASSIGN 1 switch or TURBO GAIN button. For details, see "5-3-5 Assigning Functions to Assignable Switches" on page 96. Recording Tele-File marks 1 Start recording and set the camcorder to recording pause mode by pushing the VTR START button or the VTR button on the lens. 2 Push the ASSIGN 1 switch or the TURBO GAIN button to which the TELE-FILE MARK function is assigned. The mark to be recorded appears on the viewfinder. When you record a Tele-File mark for the first time after you turn on the power of the camcorder, the mark selected on the menu appears. For details, see " Setting the Tele-File mark to be recorded for the first time after power on" on page 54. When OK is selected on the menu This message disappears after 3 seconds. The mark displayed when it disappears from the viewfinder is recorded with the recording start time code. Message TELE-FILE MARK: OK TELE-FILE MARK: NG Meaning States that an OK mark has been recorded. States that an NG mark has been recorded. Message TELE-FILE MARK: KP TELE-FILE MARK: ERASE Meaning States that a KP mark has been recorded. States that the Tele-File mark recorded on that shot has been cancelled. If the mark displayed on the viewfinder is different from the desired one Push the ASSIGN 1 switch several times while the mark is displayed until the appropriate mark appears on the viewfinder. The mark changes in the order of OK t NG t KP t ERASE .... If the display disappears before you select the appropriate mark Continue pushing the ASSIGN 1 switch until the desired mark appears. If the desired mark disappears from the viewfinder while that mark is displayed, the mark recorded before will be overwritten and the mark newly displayed is recorded. Notes • Tele-File marks are recorded only when they are recorded using the ASSIGN 1 switch to which this function has been assigned. • Tele-File marks can be added only to the shot recorded just before entering the rec pause mode. When the message "INVALID OPERATION !" appears This message appears when you perform one of the following misoperations: • You push the ASSIGN 1 switch before the camcorder enters the recording pause mode after loading the cassette. • If you turn off the power of the camcorder in recording pause mode and then turn on the power again, the camcorder is in the recording pause mode. Then, you push the ASSIGN 1 switch in this situation. • You push the ASSIGN 1 switch in a mode other than recording pause mode. Setting the Tele-File mark to be recorded for the first time after power on Using the menu, you can select the mark to be recorded in the first recording pause mode when you press the ASSIGN 1 switch after you turn on the power of the camcorder. Note This menu setting allows the camcorder to display a mark when you use the Tele-File mark for the first time after you turn on the power of the camcorder. When you press the ASSIGN 1 switch after that, the last selected mark appears. 54 Recording the Recording Start Time Code onto the Memory Label - Tele-File