Sony HDW F900R Operation Manual - Page 62
Setting the Electronic Shutter, 4-2-1 Shutter Modes, Shutter Modes
View all Sony HDW F900R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 4 Adjustments and Settings for Recording If you have no time to adjust the white balance Set the WHITE BAL switch to PRST. The white balance is automatically set as follows, depending on the FILTER selector setting. A: 5600K B: 3200K C: 4300K D: 6300K For details about setting the white balance automatically, see "Adjusting the white balance automatically" on page 60. White balance memory Values stored in memory are held until the white balance is adjusted again. There are two sets of white balance memories, A and B, and adjustments for each of the filters can be automatically stored in the memory corresponding to the setting (A or B) of the WHITE BAL switch. The camcorder has four builtin filters, so a total of eight (4 × 2) adjustments can be stored. The number of memories allocated to each of A and B can be limited to one without linking to the filter setting by setting WHT FILTER INH (page 159) to ON on the FUNCTION 3 page of the MAINTENANCE menu. In this case, adjustments for each of A and B are stored separately from the value when WHT FILTER INH (page 159) is set to OFF. If the WHITE BAL switch is set to B, and on the FUNCTION 2 page of the OPERATION menu, the WHITE SWITCH item is set to ATW, the ATW (Auto Tracing White) function is activated to automatically adjust the white balance of the picture being shot for varying lighting conditions. 4-2 Setting the Electronic Shutter This section describes the shutter modes that can be used with the electronic shutter of the camcorder, and describes the procedure for selecting the shutter speed and shutter mode. 4-2-1 Shutter Modes The shutter modes that can be used with the electronic shutter and the shutter speeds that can be selected are shown below. Standard mode Use this mode for shooting fast-moving subjects with little blurring. Frame frequency 59.94i 50i 23.98PsF 24PsF 25PsF 29.97PsF Shutter speed (sec.) 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 1/32, 1/48, 1/50, 1/60, 1/96, 1/125, 1/ 250, 1/500, 1/1000, 1/2000 1/32, 1/48, 1/50, 1/60, 1/96, 1/125, 1/250, 1/500, 1/1000, 1/2000 1/33, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 1/40, 1/60, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/2000 ECS (Extended Clear Scan) mode Use this mode for obtaining images with no horizontal bands of noise when shooting subjects such as monitor screens. Frame frequency 59.94i 50i 23.98PsF 24PsF 25PsF 29.97PsF Shutter speed 30.00 to 4300 Hz 25.00 to 4700 Hz 24.00 to 2000 Hz 24.00 to 2000 Hz 25.00 to 2100 Hz 30.00 to 2500 Hz SLS (slow speed shutter) mode (with an optional HKDW-905R) The SLS mode can only be selected when an optional HKDW-905R is installed in the camcorder. 62 Setting the Electronic Shutter