Sony HDW F900R Operation Manual - Page 67
Selecting the automatic iris window, When an optional RM-B150/B750 Remote Control, Unit is connected
View all Sony HDW F900R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 4 Adjustments and Settings for Recording The AUTO IRIS page disappears from the viewfinder screen. 6 Turn the MENU knob to change the reference value. Note When you push the MENU knob in ECS or SLS1) mode, the camcorder enters a mode where you can change the frequency in the ECS mode or the number of frames in the SLS mode by turning the MENU knob. 1)The SLS mode is effective only when an optional HKDW-905R extension board is installed in the camcorder. The changed reference value is retained until the power of the camcorder is turned off. Even if the reference value is changed, it reverts to the standard value every time the power is turned on. To open the iris by 0.25 stop: Turn the MENU knob further counterclockwise as seen from the front of the camera. One bar (s) appears in the upper part to the left of the F number in the iris indication. To open the iris by 0.5 stop: Turn the MENU knob further counterclockwise as seen from the front of the camera. One bar (x) appears in the upper part to the left of the F number in the iris indication. To open the iris by 0.75 stop: Turn the MENU knob further counterclockwise as seen from the front of the camera. Two bars (sx) appear in the upper part to the left of the F number in the iris indication. To open the iris by 1 stop: Turn the MENU knob counterclockwise as seen from the front of the camera. Two bars (xx) appear in the upper part to the left of the F number in the iris indication. To close the iris by 0.25 stop: Turn the MENU knob clockwise as seen from the front of the camera. One bar (s) appears in the lower part to the left of the F number in the iris indication. To close the iris by 0.5 stop: Turn the MENU knob clockwise as seen from the front of the camera. One bar (x) appears in the lower part to the left of the F number in the iris indication. To close the iris by 0.75 stop: Turn the MENU knob clockwise as seen from the front of the camera. Two bars (sx) appear in the lower part to the left of the F number in the iris indication. To close the iris by 1 stop: Turn the MENU knob clockwise as seen from the front of the camera. Two bars (xx) appear in the lower part to the left of the F number in the iris indication. Opening the lens iris Iris opened by 0.25 stop Iris opened by 0.5 stop Iris opened by 0.75 stop Iris opened by 1 stop Closing the lens iris Iris closed by 0.25 stop Iris closed by 0.5 stop Iris closed by 0.75 stop Iris closed by 1 stop When an optional RM-B150/B750 Remote Control Unit is connected The IRIS control knob of the RM-B150/B750 can be used for lens iris setting. In this case, the bar display (s) does not appear. Selecting the automatic iris window 1 Follow steps 1 and 2 in "Changing the reference value" (page 66) to display the AUTO IRIS page. 2 Turn the MENU knob to move the b mark to IRIS WINDOW IND, then push the MENU knob. The b mark on the left of IRIS WINDOW IND changes to a z mark, and the z mark on the left of the setting changes to a ? mark. 3 Turn the MENU knob until ON appears, then push the MENU knob. The z mark returns to a b mark, and the ? mark returns to a z mark. The currently selected auto iris window appears on the screen. 67 Changing the Reference Value for Automatic Iris Adjustment