Sony PDWHR1 User Manual (PDW-HR1 Operation Manual Ed. 1 Rev. 2 for Version 2.0 - Page 106
This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1, discclip, external, discvoice
View all Sony PDWHR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 6 Edit List Editing Item PLAYER SEL EDIT PRESET INPUT VOICE CH OUTPUT VOICE CH EDIT MODE EDIT POINT Set Start Time Code P-ROLL TIME Audio Level 106 Overview Operation/setting Selects the source of the clips to be used as material. disc(clip): Clips (video and audio data) on a disc inserted into the recorder external: External device disc(voice): Audio (audio data, distinct from clips) on a disc inserted into the recorder SxS: Clips (video and audio data) on an SxS memory card inserted into the recorder You can display this item without displaying the menu (shortcut operation). To do so, press the PLAYER button with the SHIFT button held down in the EDIT LIST or RECORDER screen. Note The settings "disc(voice)" and "SxS" appear when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is installed. Selects the target of player editing. Clip: Clip (video and audio data) Voice: Audio (audio data, independent of any clip) You can display this item without displaying the menu (shortcut operation). To do so, press the RECORDER button with the SHIFT button held down in an editing screen. Notes • This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is installed. • This item is always reset to "Clip" when this unit is powered on. A "Voice" setting is not saved. Selects the audio input channel. CH 1 to CH 8 Note This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is installed. Selects the output channel for a voice track. CH 1 to CH 8 Notes • This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is installed. • The current setting of this item at the start of editing is applied across the entire edit list. It is not possible to change this setting for different voice data segments. Selects the edit mode. When EDIT PRESET is set to "Voice", this is fixed as "overlay". insert: Insert mode overlay: Overlay mode Selects the handling of audio playback at edit points. (The options are the same as those of setup menu item 320.) cut: Carry out a cut edit (possibly resulting in audio discontinuities at the edit point). fade: Fade out and fade in. Sets the start timecode. Sets the preroll time. (The options are the same as those of setup menu item 001.) 0 Sec to 5 Sec to 30 Sec: Set the preroll time within the range from 0 and 30 seconds in steps of 1 second. (A preroll time of at least 5 seconds is recommended.) Sets the audio level for audio data and voice-over data. -∞, -80 dB to 0 dB to 12 dB: Can be set in units of 1 dB across the range from -∞ to 12 dB. Note This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-MK1 option board is installed.