Sony PDWHR1 User Manual (PDW-HR1 Operation Manual Ed. 1 Rev. 2 for Version 2.0 - Page 52
P3 TC P4 OTHER Sub-item, Setting, 24F TC.
View all Sony PDWHR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 3 Preparations Item Setting F3: PB VOL Sets the playback audio level of audio channels 5 to 8. a) The playback audio level can be adjusted within the range from -200 to +200 (-∞ to +12 dB) by turning the PUSH SET knob. Sub-item F1: A5 VOL Playback audio level of audio channel 5 F2: A6 VOL Playback audio level of audio channel 6 F3: A7 VOL Playback audio level of audio channel 7 F4: A8 VOL Playback audio level of audio channel 8 F5: - F6: EXIT Exit the playback audio level setting sub-menu. F4: MIX/SWAP b) Enables or disables mixing output of audio/voice signals. OFF: Do not output ON: Output F5: SPEAKER Enables or disables output from this unit's speaker. OFF: Do not output ON: Output F6: AU METER Selects the display mode of the audio level meters. FULL: Display the range from -60 dB to 0 dB. FINE: Display a magnified section with 0.25 dB step marks. a) To enable this setting, the following settings are also required, in the same way as for volume operations for channels 1 to 4. - On the control panel, set the VARIABLE/PRESET switch for playback to "VARIABLE". - Set setup menu item 131 AUDIO VOLUME to "each". b) Displayed only when the PDBZ-UPG03 Software Upgrade Key or PDBKMK1 option board is installed. P3 TC page Item F1: TC UB F2: F3: F4: DF/NDF Setting When the PRESET/REGEN switch is set to "PRESET", selects whether the user bits of the timecode generator are synchronized to the internal clock. FIX: Do not synchronize user bits. TIME: Synchronize user bits to the internal clock. (Unassigned function button) (Unassigned function button) Selects the drop-frame mode for the internal timecode generator and the counter in 59.94i/59.94P/29.97P mode. DF: Drop-frame mode NDF: Non-drop-frame mode Item F5: PDPSET F6: TCR Setting When the system frequency is set to 1080/59.94i, 1080/29.97P, or 720/ 59.94P, presets the timecode of the A frame of the pulldown sequence. 24F TC.: Reference timecode for A frame 30F TC.: Timecode after pulldown conversion from 24-frame timecode Sub-Item F1: - F2: - F3: B F4: b Move the flashing digit to the left or right. F5: SET Saves the new setting and exits the pulldown sequence preset sub menu. F6: EXIT Exits the pulldown sequence preset sub menu without saving the new setting. Selects the type of timecode to display in the time data display area. TC: Display TC. VITC: Display VITC. P4 OTHER page Item F1: ALRM LOG F2: ERR LOG Setting Displays an alarm log screen. Sub-Item F1: ALARM Alarm messages F2: DATE Dates and times when the alarms occurred F3: TC Positions where alarms occurred (timecode) F4: DETAIL Alarm details F5: - F6: EXIT Exits the alarm log screen sub menu. Displays an error log screen. Sub-Item F1: ERROR Error messages F2: DATE Dates and times when the errors occurred F3: TC Positions where errors occurred (timecode) F4: DETAIL Error details F5: - F6: EXIT Exits the error log screen sub menu. 52 Basic Function Menu Operations