Sony PDWHR1 User Manual (PDW-HR1 Operation Manual Ed. 1 Rev. 2 for Version 2.0 - Page 159
M3: OTHERS: Other setting items, 9LINE to 20LINE
View all Sony PDWHR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
M3: OTHERS: Other setting items Item Setting M3B: VANC RX M3B0: VANC RX PARAMETER PACKET For setting HDSDI VANC data input parameters Sub-item Notes • In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the corresponding line in the second field (for example, if line 9 is selected, line 572 is also selected for VANC packet reception). • Menu item M3B0 enables recording of one VANC packet when the selected line contains any packets whose DID/SDID matches the value set with this menu item. • Up to four packets are recorded per each line regardless of the DID and SDID for the VANC set with menu item M3B1 or M3B2. • It is not possible to set the same line with menu items M3B0, M3B1, and M3B2. If the same line is specified, priority is given in the order of M3B0, M3B1, and M3B2 (for example, if the same line is specified with M3B0 and M3B1, the setting with M3B1 is ignored). • When VANC data is output to HDSDI playback signals, the number of the output VANC line is the same as that of the input VANC line. • When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or essence mark output takes priority. To disable UMID or essence mark output, set setup menu item 651 or 657 to "off". 1 LINE Selects the lines for the VANC to be received. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) 2 DID Specification of the DID of the VANC to receive 00-FF 3 SDID Specification of the SDID of the VANC to receive 00-FF M3B1: LINE1 SEL Selects the lines to be received for the HDSDI VANC data. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) M3B2: LINE2 SEL Selects the lines to be received for the HDSDI VANC data. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) M3C: BATTERY M3C0: SETUP BATTERY For details, refer to the Maintenance Manual. CONFIG END M3C1: STATUS DISPLAY M3C2: INFORMATION M3D: DATE/TIME PRESET Specifies the year, month, day, time, and time zone. M3E: USB MEMORY UTIL For installation of software upgrade M3F: FACTORY SETUP For details, refer to the Maintenance Manual. For details, refer to the Maintenance Manual. Item M40: EXTEND MENU M41: CUSTOMIZE M4: SETUP MAINTENANCE: Items relating to the setup menu Setting Select whether to display the extended menu. DISABLE: Do not display. ENABLE: Display. Select whether to enable the customization function of the setup menu. DISABLE: Do not display. ENABLE: Display. Chapter 8 Menus 159 Maintenance Menu