Sony PEG-S320 Operating Instructions (primary manual) - Page 115
Performing a local HotSync® operation with the USB cable, On your CLIE Handheld, rotate the Jog Dial
View all Sony PEG-S320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Performing a local HotSync® operation with the USB cable This section describes how to perform a HotSync® operation using the USB cable (local HotSync), assuming that you have done all the necessary preparations and installations for your CLIE handheld and your computer. For the required preparations and software installation, and for information on performing a HotSync for the first HotSync operation, see the Read This First manual. 1 Connect the CLIE handheld to the USB cable. 2 On your CLIE Handheld, rotate the Jog Dial™ navigator to select HotSync and then press the Jog Dial navigator. Or tap the HotSync icon on the Application Launcher screen. The HotSync screen appears on your CLIE Handheld. 3 Tap the HotSync icon. The HotSync operation starts. When the HotSync operation is complete, a message showing the HotSync completion is displayed on your CLIE handheld. Note Do not remove your CLIE handheld from the USB cable until the HotSync operation is complete. Otherwise the Palm Desktop for CLIE software may not quit normally. If the HotSync operation does not start Make sure that the HotSync icon is displayed in the Windows task tray on your computer screen and Local Serial is not selected from the shortcut menu. If the HotSync icon is not shown in the task tray, click Start, point to Programs, Sony Handheld, and then click HotSync Manager. Tap the HotSync icon on your CLIE handheld to start the HotSync operation. Chapter3 Exchanging and updating data using a HotSync® operation 115