Sony PEG-T615C Operating Instructions (primary manual) - Page 204
I tried to perform a local HotSync operation, but it did not, complete successfully.
UPC - 027242598119
View all Sony PEG-T615C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Troubleshooting - Frequently Asked Questions I tried to perform a local HotSync operation, but it did not complete successfully. Try each of these in turn: , Make sure that HotSync Manager is running. If HotSync Manager is running, exit, and restart it. , Make sure that Local USB is selected in the HotSync Manager menu or the Palm Desktop for CLIÉ software menu. , Check that the cradle is properly connected to the USB connector of your computer. , Read the HotSync Log for the user account for which you are performing a HotSync operation. , Make sure that your CLIÉ handheld is seated in the cradle correctly. , Make sure that the gold-plated connectors on the cradle and your CLIÉ handheld are clean. Use a pencil eraser to clean the connectors. I cannot perform an IR HotSync operation. , Make sure that the HotSync Manager is running and the Serial Port for local operations is set to the simulated port for infrared communication. , On your CLIÉ handheld, make sure that the HotSync application is set to IR to a PC/Handheld. , Make sure that the IR port of your CLIÉ handheld is aligned directly opposite to, and within a few inches of, the infrared device of your computer. , IR HotSync operations do not work after you receive a low battery warning. Check the battery power of your CLIÉ handheld. Recharge the battery if necessary. , If you have problems using a specific speed, select Prefs, Connection, IR to a PC/Handheld, Edit, then Details. Then select a lower speed in the Details dialog box. Continued on next page Chapter6 Additional information 204