Sony RM AV3000 Operating Instructions - Page 17
Press CHANNEL + or CHANNEL, Press the ENTER key. - remote
UPC - 027242599826
View all Sony RM AV3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 Press CHANNEL + or CHANNEL - to search component code numbers in the same category (in this case, code numbers which begin with "8"). Press CHANNEL + to go to the next code number. Press CHANNEL - to go back to the previous code number. CHANNEL 6 Press the ENTER key. A beep sounds, and the selected component name, the preset fourdigit component code number and "OK" light for two seconds. And the display returns to Step 2. Note It is recommended to write down the code number. 7 Press COMMANDER OFF. COMMANDER OFF Note To search component code numbers in another category, return to Step 3, or input a four-digit component code number of another category (for example, a code number which begins with "3", "4", etc.) before Step 4. 5 Aim the Commander at the component and press the POWER key. If you keep COMMANDER OFF pressed for more than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous set mode. When the remote control signal is sent, is shown on the display. If it successfully works (power-off for TV, AMP, playback for CD, MD, DAT, TAPE, light-off for LIGHTING and power-on for other components), go to Step 6. If it doesn't, repeat Steps 4 to 5. 17