Sony RM AV3000 Operating Instructions - Page 54
Follow Steps 1 to 6 on Press the COMPO key.
UPC - 027242599826
View all Sony RM AV3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Transferring Data between Commanders (continued) 7 Press the ALL key. ALL Note If "NG" appears while sending the data, go back to Step 5 and continue the operation or press COMMANDER OFF to stop the operation. 10 Press COMMANDER OFF. COMMANDER OFF ALL: All data of the Commander COMPO: Data of a Component Select button or a Label key "ALL X" appears on the Mode Display key, and "ALL" appears on the left Label key. 8 Confirm that the receiving Commander is ready for data. (To set the receiving commander, follow the procedure on page 56.) 9 Press the "ENTER" key. If you keep COMMANDER OFF pressed for more than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. Note Be sure that the receiving Commander is ready to receive data. To transfer the data of a Component Select button or a Label key The data of a Component Select button or a Label key on this Commander (the settings and learned signals programmed on the keys and buttons) can be transferred to a Component Select button or key on another Sony RM-AV3000. 1 Follow Steps 1 to 6 on page 53. During transferring the data, "c c c c c c c c" flashes. When the all data has been successfully transferred, "END" appears on the right Label key. 2 Press the COMPO key. COMPO 54