Sony RM AV3000 Operating Instructions - Page 8
When to replace the batteries, Setting the Clock - remote control
UPC - 027242599826
View all Sony RM AV3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the Batteries (continued) When to replace the batteries Batteries for remote control operation and backlight (four size AA (R6) batteries) Under normal conditions, alkaline batteries will last up to 5 months. If the Commander does not operate properly, alkaline batteries might be worn out and E is displayed on the LCD touch panel. When the display dims or the backlight for the touch keys grows dim, replace the alkaline batteries with new ones. Notes on batteries • Do not mix old batteries with new ones or mix different types of batteries together. • If the electrolyte inside the battery should leak, wipe the contaminated area of the battery compartment with a cloth and replace the old batteries with new ones. To prevent the electrolyte from leaking, remove the batteries when you plan not to use the Commander for a long period of time. • After replacing batteries, set the clock (page 8). Setting the Clock Setting the clock for the first time after installing batteries For the first time after installing batteries, the Commander is in the clock setting mode. "CLOCK" is displayed on the Mode Display key, and " -:- -" flashes on the Clock Display key, and "STD TIME" and "DS TIME" on the Label keys are flashing. 1 Select STD TIME (standard time) or DS TIME (daylight saving time). If the summer time (daylight saving time) is used in your area, press the DS TIME key when it is in the summer time. If not, press the STD TIME key. If the summer time is not used in your area, press the STD TIME key. or The selected STD TIME or DS TIME key lights. "SET" and "SU" flash and "12:00 AM" lights on the Clock Display key. 8