Sony RM AV3000 Operating Instructions - Page 33
COMMANDER OFF., Continued, SYSTEM CONTROL 1 or 3 button, Other buttons
UPC - 027242599826
View all Sony RM AV3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
To program a new series of operations for the buttons which have already been set SYSTEM CONTROL 1 or 3 button: Erase the factory preset program. See page 37. Other buttons: Erase the program. See page 35. 4 Select the component to operate by pressing the Component Select button (in this case, TV) or the Label key. To change label keys, press the OTHER button repeatedly until you obtain the desired component name. TV The selected component name is displayed on the Mode Display key, and the keys for the selected component flash. 6 Repeat Steps 4 and 5 and program the buttons and keys for the series of operations. In this example, press the following buttons and keys. 7 When you have programmed all the keys and buttons, press COMMANDER OFF. COMMANDER OFF 5 Press the key(s) or button(s) for the desired operation. If you want to turn on the TV, press the POWER key. With a beep sound, a series of operating commands is registered and displayed in order. When the display of keys for the component of which key you programmed last appears, the System Control setting finishes. If you keep COMMANDER OFF pressed for more than 2 seconds The Commander turns off. When you have programmed the buttons on the Commander The names of buttons on the Commander which are not on the LCD touch key display (VOLUME +/ -, MUTING, CHANNEL +/-, RECALL, MENU, OK, EXIT, , , , and ) are displayed on the right Label key. Continued 33