Sony RM AV3000 Operating Instructions - Page 60
Press the keys for the operation in, order 1, ENTER., Press the macro key in this case, VIDEO 4.
UPC - 027242599826
View all Sony RM AV3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Selecting a Channel with a Single Key Press - Channel Macro Function (continued) If you press the Label key for which the Channel Macro function cannot be programmed "NG" flashes twice and "NG" sound is heard. To change the name of the macro key (Label key) Keep the macro key (Label key) pressed for more than 2 seconds, and follow Steps 2 - 5, page 24. 6 Press the keys for the operation in order (1t 2 t 3 t ENTER). Note If you enter more than four keys, the last four keys are programmed for the macro key. 7 Press the macro key (in this case, VIDEO 4). "1," "2," "3," and "ENTER" appear twice. Note You cannot program the Channel Macro function for a macro key that has "learned" a signal. Try again with another macro key, or clear the "learned" signal (page 25) from the button and program the Channel Macro function on it. To clear the Channel Macro function 1 While pressing COMMANDER OFF, press MUTING. 2 Press the SET key. 3 Press the CHMACRO key. 4 Select the component by pressing the Component Select button or the Label key. 5 While pressing the DEL key, press the macro key. Note You can also clear the character contents you input by following the procedure above repeatedly. 8 Press COMMANDER OFF. COMMANDER OFF If you keep COMMANDER OFF pressed for more than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. 60