Home » Sony Manuals » Security Cameras » Sony SNC-DF70N » Manual Viewer

Sony SNC-DF70N User Guide - Page 25

UDP Unicast, Multicast, Unicast, Cancel, RTP Real-time Transport Protocol and UDP

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Operating the Camera fire-wall is installed between the camera and the computer, or depending on the network environment, the video/audio may not play properly when UDP (Unicast) is selected. In this case, select TCP. UDP (Multicast): This is selectable when the multicast streaming (page 31) is On. When UDP (Multicast) is selected as the transmission port, RTP (Real-time Transport Protocol) and UDP multicast techniques are adopted for video/audio transmission. By selecting it, the network transmission load of the camera can be reduced. If a router which does not correspond to the multicast or the fire-wall is installed between the camera and the computer, the video/audio may not played properly. In this case, select TCP or UDP (Unicast). 4 Click OK to close the dialog. If you decide not change the transmission setting, click Cancel. 25 Switching TCP/UDP Transmission Mode

Section	Page
Table of Contents	2
Overview	4
Features	4
Camera section	4
Network section, Control section	4
Others	4
Phenomena Specific to CCD Image Sensors	5
How to Use This User’s Guide	6
System Requirements	6
Preparation	7
Assigning the IP Address to the Camera	7
Assigning an IP address using the IP Setup Program	7
When using Windows XP Service Pack 2	9
When using Windows Vista	11
Accessing the Camera Using the Web Browser	13
Basic Configuration by the Administrator	15
Operating the Camera	16
Administrator and User	16
Logging in to Homepage - Welcome Page	17
Logging in as a User	17
Displaying the setting window for the administrator directly	18
About Viewers	18
Configuration of Main Viewer	19
Main menu	19
Camera Control Section	19
Monitor Image	20
Controlling the Monitor Image	20
Monitoring the camera image	20
Zooming in the monitor image	21
Capturing a Monitor Image	21
Capturing a monitor image	21
Saving the captured image	22
Sending an Image File	22
Sending a Monitor Image via e-Mail	22
Sending a Monitor Image to an FTP Server	22
Recording a Still Image in the Built-in Memory of the Camera	23
Controlling Alarm output	23
Controlling Day/Night Function	24
Switching TCP/UDP Transmission Mode	24
Administrating the Camera	26
Basic Operations of Administrator Menu	26
How to set Administrator menu	26
Configuration of Administrator Menu	27
Configuring the System - System setting menu	28
System Tab	28
Date & time Tab	29
Initialize Tab	30
System log Tab	30
Access log tab	30
Setting the Camera Image and Audio - Camera setting Menu	31
Common Tab	31
Picture Tab	32
Day/Night Tab	33
MPEG4 Tab	34
JPEG Tab	35
Reset Tab	35
Configuring the Network - Network setting Menu	36
Network Tab	36
PPPoE Tab - Setting of PPPoE Connection	37
Dynamic IP address notification Tab - Notifying the IP Address	37
Setting the User - User setting Menu	39
Setting the Security - Security setting Menu	40
Sending an Image via mail - e-Mail (SMTP) setting Menu	41
Common Tab - Setting the SMTP Function	41
Alarm sending Tab - Setting the mail sending mode when detecting the alarm	42
Periodical sending Tab - Setting the periodical mail sending mode	43
Sending Images to FTP Server - FTP client setting Menu	44
Common Tab - Setting the FTP Client Function	44
Alarm sending Tab - Setting the FTP client action when detecting the alarm	45
Periodical sending Tab - Setting the Periodical FTP Client Activity	46
Recording Images in Memory - Image memory setting Menu	47
Common Tab - Setting the Image memory Function	47
Alarm recording Tab - Setting the Image Memory Function when Detecting the Alarm	48
Periodical recording Tab - Setting the Periodical recording mode	49
Folder Structure of Image Memory	49
Downloading Images from the Camera - FTP server setting Menu	50
Setting the Alarm Output - Alarm output setting Menu	51
Alarm out 1, 2 Tab	51
Setting the Operations from the Viewer Page - Trigger setting Menu	52
Setting the Schedule - Schedule setting Menu	54
Setting the Alarm Buffer - Alarm buffer setting Menu	54
Setting the Motion Detection Function - Motion detection setting Menu	55
Setting the Motion Detection Area, Sensitivity and Threshold level	56
Others	57
Using the Supplied Setup Program	57
Starting the Setup Program	57
Bandwidth Control Tab	57
Date time Tab	58
PPPoE Tab	58
Rebooting the Camera	59
Using the SNC audio upload tool - Transmitting Audio to Camera	59
Installing the SNC audio upload tool	59
Connecting the Camera to the Computer	60
Using the SNC audio upload tool	60
Using the SNC video player - Playing Video/ Audio File Recorded on Camera	65
Download the SNC video player	65
Using the SNC video player	65
Using the Custom Homepage Installer	66
Uploading the homepage to the camera using the Custom Homepage Installer	66
Assigning the IP Address to the Camera Using ARP Commands	68
Using the SNMP	69
1. Inquiry Commands	69
2. Setting Commands	69