Sony SNC-DF70N User Guide - Page 63
Voice alert tab, IP address, Model, Serial, Status, Ready, Connected, Fault, Sending - review
View all Sony SNC-DF70N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
IP address: Displays the IP address of the network camera. "DHCP" is shown at the end of the IP address when the IP address is obtained with a DHCP server. Model: Displays the model name of the network camera. Serial: Displays the serial number of the network camera. Status: Displays the current status of the camera. Ready: The camera is ready for connection. Connected: The camera connection is successful. Fault: The camera connection is unsuccessful. Sending: Audio data being transmitted Down: Transmission is interrupted due to a network problem. Voice alert tab Use this menu to record the sound through the microphone connected to the computer and upload the recorded audio file to the camera. You can upload the audio file to multiple cameras selected from the camera list simultaneously. When you click it during playback, playback stops and the progress bar display returns to the start position. (recording) Click to start recording of the sound input to the computer microphone. The maximum recording time is 30 seconds. The codec specified in the Setting tab is used for the recording. The recorded file is displayed as "RecordedFile.vof." Notes • Recording or playback stops if you switch the tab during recording or playback. • The recorded file is not stored in the computer. Recording/playback progress bar You can check recording or playback progress with this bar. During recording, the right end of the bar represents 30 seconds and the remaining recording time is displayed below the bar. During playback, the maximum time of the bar depends on the recorded time. (file open) Click to select a previously saved audio file. You can play the selected audio file or upload it to the camera. (save) Click to save the recorded audio file to the computer. Voice alert number select Others (playback) To start playback, open the recorded file or another audio file and click this icon. You can check the recorded sound or the contents of the selected audio file. During playback, the progress bar shows playback progress. (stop) Click to stop recording or playback. When you click it during recording, recording stops, and you can review the recorded sound or upload the recording to the camera. Specify the voice alert number to which you want to upload the audio file. For example, select 1 when uploading to voice alert 1. The name of the uploaded audio file is displayed to the right of the number. "Not uploaded" is displayed if no audio file is uploaded to the camera. 63 Using the SNC audio upload tool - Transmitting Audio to Camera