Sony SRG300SE Installation Guide (SRG-300SE Application Guide) - Page 19

2 Right click the mouse. Click Firmware Upgrade from the displayed menu. The Firmware Upgrade screen is displayed. Device list Module list Tip The Firmware Upgrade screen can also be displayed using the following method: • Select Firmware Upgrade from the Tools menu. Device list Select the device to upgrade. A progress bar is displayed when upgrading is in process. The status field shows current status. Module list To display the dialog, click the Browse button to the right of the model (in the module list) to upgrade. Select the target SVU file from the dialog. You can select one file for each model. Upgrading 1 Set the order to perform device upgrading using Up and Down. 2 Click Browse and select an upgrade file for each model. 3 Select how many devices to upgrade in Paralleled upgrade quantity. 4 To back up the device setting, check Backup device setting. Tip You can specify the backup folder under Device setting backup folder, on the General tab in Option from the Tools menu. 5 Click Start upgrading. Upgrading starts. Notes • To stop upgrading, click Stop upgrading. To protect the device, once some devices start upgrading, they cannot be canceled until the upgrading is completed. • Do not turn off the power until the device restarts after upgrading. Using CGI Sending The CGI Sending function allows you to send CGI to a device. How to perform CGI Sending 1 From the Device list, select the camera to receive CGI. 2 Right click the mouse. Click CGI Sending from the displayed menu. The CGI Sending screen is displayed. 3 Enter a command in the CGI command box. 4 Click Send. The CGI command is sent to the selected camera(s) in order of ID. 19 Using the SNC toolbox