Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 112

Listening to XM Radio For details on XM Radio service, refer to "Listening to XM Radio" (page 81) in "Tuner Operations." Checking the XM Radio ID 1 Press TUNER repeatedly to select "XM RADIO." You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING - to select channel 0. You can also press TUNING MODE on the receiver to select "AUTO," and then turn TUNING to select channel 0. 3 Check the XM Radio ID on the display and write it in the space provided here. ID Selecting channels from a category (CATEGORY TUNING) 1 Press TUNER repeatedly to select XM Radio. You can also use INPUT SELECTOR on the receiver. 2 Press CATEGORY MODE repeatedly to select "ONE CATEGORY." • ALL CATEGORY: You can select a channel from all the categories. The initial setting is "ALL CATEGORY." • ONE CATEGORY: You can select a channel from one category. "CAT" is displayed on the display when you set to "ONE CATEGORY" mode. 3 Press CATEGORY + or CATEGORY - to select the category you want. The category is selected and the channel with the lowest number in the specified category is selected. 4 Press TUNING + or TUNING - to select the channel. 112GB You can also press TUNING MODE one the receiver to select "AUTO," and then turn TUNING to select the channel. Selecting a channel number directly (Direct tuning) 1 After selecting XM Radio, press D.TUNING. 2 Press the numeric buttons to enter the channel number, and then press to enter. 3 Press ENTER to enter the selection. Displaying the XM Radio information Press DISPLAY repeatedly. Each time you press DISPLAY while tuning in the channel, the display changes cyclically as follows: Channel name t Channel number t Category t Artist name/Feature t Song/ Program title t Sound field type t Volume Presetting XM Radio channels 1 Tune in the station that you want to preset. For details on this operation, refer to "Selecting channels from a category (CATEGORY TUNING)." 2 Press MEMORY. 3 Press PRESET + or PRESET - to select a preset number. You can also select the number by pressing the numeric buttons. Preset numbers from 1 to 30 are available. Channel 1 is preset for the preset numbers when you purchase the receiver. 4 Press ENTER. 5 Repeat steps 1 to 4 to preset another station.