Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 78
If you cannot tune in a station, and the entered numbers flash
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Direct tuning Enter the frequency of a station directly by using the numeric buttons. 2 3 8 5 4 5, 7-9 6 MENU 1 Connect a TV monitor to this receiver. Refer to "3: Connecting the monitor for displaying menus" (page 19). 2 Turn on the receiver and the TV. 3 Press RECEIVER to enable receiver operation. 4 Press ON SCREEN. The menu list of this receiver appears on the TV screen. Press MENU if the menu list does not appear on the TV screen. 5 Press V/v repeatedly to select "FM" or "AM," then press or b. 6 Press OPTIONS. 7 Press V/v to select "Direct Tuning," then press . 8 Press the numeric buttons to enter the frequency, and then press to enter. Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 9 Press . Tip If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception. If you cannot tune in a station and the entered numbers flash Make sure you have entered the right frequency. If not, repeat steps 8 to 9. If you still cannot tune in a station, the frequency is not used in your area. 78GB