Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 18
ZONE 2 connection, SPEAKER terminals
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
c) When you connect a sub woofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a sub woofer, then sound may not be output. Note When you connect all the speakers with a nominal impedance of 8 ohms or higher, set "Speaker Impedance" in the System settings menu to "8 Ω." In other connections, set it to "4 Ω." For details, see "8: Setting the speakers" (page 40). Tip To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from both the SPEAKERS terminals and the PRE OUT jacks. For example, if you want to connect just the front speakers to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks. ZONE 2 connection You can assign the SURROUND BACK SPEAKER terminals F and G to the speakers of the ZONE 2. Set the surround back speaker settings (page 74) to "ZONE 2." See "Listening to the sound in another zone (ZONE 2/ZONE 3 operations)" (page 102) for details of on connection and operation in zone 2. 18GB