Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 121
To cancel programming, Starting macro play, To erase a programmed macro, Press RM SET UP to finish
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
3 Press the button for the operation you want to perform to learn the function as follows. Press Operations to be programmed H, x, X, M, m, ., > Performs the operation of the button. The input Switches inputs. button for more than 1 second MACRO 1 or MACRO 2 Make a one second interval. When you want to make a longer interval, press MACRO 1 or MACRO 2 repeatedly. The input button selected in step 2 flashes twice, then lights up again. 4 Repeat steps 2 and 3. When you want to assign another command for the same component, repeat step 3. 5 Press RM SET UP to finish the programming process. Tip If the RM SET UP button flashes five times in step 1, and the macro programming process does not start, replace the batteries with new ones. To cancel programming Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. The previous command remains valid. Starting macro play 1 Press RECEIVER. The RECEIVER button lights up, and then turns off. 2 Press MACRO 1 or MACRO 2 to start the macro. The macro starts and execute the commands in the order you assigned them. While the commands are being sent, the RM SET UP button flashes and the RECEIVER button lights up. When the commands have been sent, the RM SET UP and RECEIVER buttons turn off. To erase a programmed macro 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP to clear the stored macro. The RM SET UP button flashes, repeatedly. 2 Press RM SET UP. Settings stored as macro are cleared. Using the Remote 121GB