Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 75
Adjusting the equalizer, Auto Calibration, then
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Advanced Speakers Setting Up Adjusting the equalizer You can use following parameters to adjust the tonal quality (bass/treble level) of the front speakers and to store up to 5 different equalizer settings and apply them. These settings are applied to all sound fields and for each speaker. Bass Treble Level (dB) Frequency (Hz) Notes • PCM 96 kHz signals cannot adjust the equalizer. • This function does not work in the following cases. - MULTI IN is selected. - Input signals of which the sampling frequency is more than 96 kHz are being received. • If you adjust the equalizer during DTS 96/24 signal reception, the signal will be played only at 48 kHz. 2 3 1 Connect a TV monitor to this receiver. Refer to "3: Connecting the monitor for displaying menus" (page 19). 2 Turn on the receiver and the TV. 3 Press RECEIVER to enable receiver operation. 4 Press ON SCREEN. The menu list of this receiver appears on the TV screen. Press MENU if the menu list does not appear on the TV screen. 5 Press V/v repeatedly to select "Settings," then press or b. The Settings menu list appears on the TV screen. 6 Press V/v repeatedly to select "Auto Calibration," then . 7 Press V/v repeatedly to select "User EQ," then press . 8 Press V/v/B/b repeatedly to select the preset number that you want to register as the number to store the equalizer adjustment. 9 Press or b. 10Press V/v repeatedly to select "Edit," then press . The equalizer adjustment screen appears on the TV screen. 4 5-13 MENU continued 75GB