Sony STR-DA5200ES Operating Instructions (Large File - 23.24 MB) - Page 47
When you select WRN CHECK
View all Sony STR-DA5200ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Getting Started Display Explanation CODE 34 Speakers are not placed in the proper position. Speakers or an optimizer microphone on the right or left may be placed wrongly. See "1: Installing speakers" (page 15) and check the speaker position. WARNING 40 The auto calibration has completed. However, the noise level is high. You may be able to perform the auto calibration properly if you try it again, even though the measurement cannot be performed in all environments. Try to perform the auto calibration in a quiet environment. WARNING 41 The sound input from the optimizer microphone is outside the acceptable range. It is louder than the loudest sound that can be measured. Try to perform the auto calibration when the environment is quiet enough to allow proper measurement. WARNING 42 The volume of the receiver is out of the acceptable range. Try to perform the auto calibration when the environment is quiet enough to allow proper measurement. WARNING 43 The distance and position of a sub woofer cannot be detected. Or the angle of the speaker position cannot be detected. This may be caused by noise. Try to perform the auto calibration in a quiet environment. NO WARNING There is no warning information. ---------- No speakers are connected. •CODE 31 1 Press , then follow the instructions from step 1 of "Performing auto calibration." •CODE 32, 33, 34 1 When you press , "RETRY?" appears. 2 Press V/v to select "YES," then press . 3 Follow the instructions from step 2 of "Performing auto calibration." 4 Press V/v repeatedly to select preset number to store preset settings then press . When you select "WRN CHECK" If a warning on the measurement result is present, detailed information is displayed. Press to return to step 1 of "Confirming/saving the measurement results." Tip Depending on the position of the sub woofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. 47GB